Comments on: A Review Of The Canon ImageCLASS MF4370dn Laser All-in-One Printer For The Mac

By: Neidi

Neidi — Wed, 03 Feb 2010 20:09:26 +0000

How did u get the scanning to work. I downloaded and installed the latest “scanner driver” from the Canon website but I can’t figure out how to make it work. HELP!

By: Adam

Adam — Sat, 24 Oct 2009 20:02:52 +0000

Don’t worry you are not missing much.. The network scanning on the machine is so slow anyway you would never use it. Thats on a PC too.

By: Mark

Mark — Sat, 26 Sep 2009 03:04:46 +0000

The network printing problem is apparently unfixable at this time, Canon has sent me a different MF4370DN (I can’t call it a new one because it had over 16000 copies on it according to the counter — I feel a bit cheated because the one that I sent back had 35). The replacement took 5 weeks to arrive, didn’t have the latest firmware and has the same problem. My dialog with Canon is ongoing and I think that they have no real answer for this problem.

By: Ambar

Ambar — Wed, 23 Sep 2009 15:12:24 +0000

Thanks for help with duplex printing. that worked.

By: chanakya

chanakya — Sat, 04 Jul 2009 18:18:06 +0000

Mark, hate to say, I have the same issue. The printer loses connection to the router after a while and requires a restart to acquire an ip address. Good hardware, but Canon needs to improve its software.

I’m guessing when it goes into energy saver mode, it loses connection.

By: Mark

Mark — Sat, 04 Jul 2009 17:44:26 +0000

I have the same unit on a Mac network but if you do not print for some time (usually overnight) any print sent to the printer fails with a message printer not on network. If I cycle the power on the printer and restart the queue and print job it will print. USB printing is fine. Are you having any issues of this type? I have installed the latest firmware.

By: admin

admin — Sat, 13 Jun 2009 05:08:25 +0000

@Hoon. Glad it worked out!

By: Hoon

Hoon — Fri, 12 Jun 2009 01:18:20 +0000

Thank you so much for such a speedy response!
I have just printed out a document on 2 sides automatically.
Thank you once again.
I hope you don’t mind if I post another question in the future.

By: admin

admin — Thu, 11 Jun 2009 11:51:31 +0000

Hoon,
Open a document in Preview
Press print
The pring dialog opens
There will be a combo box called preview, change that to finishing
In that select print style as 2 sided printing from default 1 sided

Hope this helps!

By: Hoon

Hoon — Thu, 11 Jun 2009 02:51:00 +0000

Hi there,

Great review.
I bought this printer after reading this review, and I also am a Mac user.
I connected my printer using USB.
However, I am not able to duplex print for some reason.
My “Two-sided” option is selected as off and I cannot seem to change it.
Could you please tell me how to do this?
My driver is up to date.
Many thanks.